Any beam.
No drilling.
Slideworks carriages clamp onto the overhead beam your gym already has and roll heavy bags anywhere along it. Turn a bag row into open floor between classes, without a ladder and without new holes in the rig.
Clamp. Roll. Lock.
Set it on, bolt it closed
Lower it onto the beam from above, anywhere along its length. No sliding it on from an open end, no taking the rig apart. Slide the pinch bolt through underneath, spin on the knob, and clip the bag’s carabiner onto that same bolt.
Roll the bag
Back the hand knob off a turn and the carriage rolls, bag and all. Space the row for a heavy-bag class, or push them to one end for open floor.
Lock it down
Snug the knob by hand. The pads clamp the beam so the bag stays put while it gets hit. No tools, no pins, no ladder.
Works with the steel you already have.
Any exposed, load-bearing overhead member. No latch holes, no welding, no new hardware in your ceiling.
2 × 4 in tube
Rectangular steel rig beams, the common build in Muay Thai, MMA and functional-fitness gyms.
Classic I-beam
A flange-riding version for exposed structural I-beams. Tell us your flange width and we will put you on the first run.
Custom
Square tube, other sizes, or something your builder welded up. Send us a photo and the dimensions.
Make every square foot work twice.
January brings the year's biggest wave of new members. The gyms that handle it best are the ones whose rooms change shape between classes.
- One room, many classesBoxing at 6, HIIT at 7, open floor at noon. Move the bags instead of working around them.
- No install dayGoes on from above, anywhere on the beam, with the rig fully assembled. Nothing drilled, nothing welded, and it comes off clean if you move.
- Safer changeoversCoaches roll bags along the beam from the floor instead of climbing a ladder to re-hang them.
- No toolsShips assembled. One hand knob closes it, under 5 minutes per carriage.
- Built for strikesQuarter-inch steel plates, Grade 5 hardware, urethane pads that grip without marking your rig.
On a real rig, taking real rounds
A Slideworks carriage on a 2 × 4 rig in a Colorado kickboxing gym, holding a full-size heavy bag through a class.
“[Quote from Montu’s owner or head coach.]”
[Name], Montu Muay Thai
Simple parts. Heavy duty.
| Fits | 2 × 4 in rectangular steel beam, bag hung from below |
|---|---|
| Side plates | 1/4 in steel, laser cut, powder coated |
| Wheels | Four 2 in polyolefin wheels on 1/2 in Grade 5 axles, riding the top face of the beam |
| Grip | Four 90A urethane pads; one 1/2 in Grade 5 pinch bolt with a hand knob |
| Bag hanger | The pinch bolt itself. Hang the bag’s swivel or carabiner straight on it |
| Rated load | Heavy bags up to 150 lb |
| Install | Under 5 minutes, no tools. Ships assembled; closes with one hand knob |
| Made in | Colorado, by a professional athlete · Patent pending |
See it on your rig.
We are fitting gyms around Boulder, Broomfield, Louisville and Lafayette first. Tell us about your space and we will bring a carriage to try on your beam.
Or email hello@slideworksgear.com. Instagram @slideworksgear.